Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Long Beach?
Aluminum fence installation in Long Beach, CA typically costs $4,000 to $10,000 for a standard residential yard (roughly 150 to 200 linear feet), including materials, labor, and basic site prep. Most homeowners in neighborhoods like Bixby Knolls, Los Altos, and Naples pay around $6,500 for a mid-grade aluminum fence with two gates. The final number depends on linear footage, panel height, gate count, and whether the old fence needs to come out first.
Aluminum Fence Installation Cost Breakdown (2026)
Here’s where the money goes on a typical Long Beach aluminum fence job:
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Aluminum fence panels (4′ – 6′ tall) | $18 – $38 per linear foot | Residential-grade powder-coated aluminum |
| Posts and hardware | $8 – $15 per linear foot | Post caps, brackets, screws, gate hinges |
| Labor (installation) | $12 – $25 per linear foot | Includes digging, setting posts in concrete, leveling |
| Gate installation | $350 – $900 per gate | Single walk gates are cheaper; double drive gates run more |
| Old fence removal and disposal | $300 – $1,200 | Depends on material and linear feet; wood is cheaper to haul than chain-link with concrete footings |
| Permit fees | $80 – $250 | Required in Long Beach for fences over 42″ tall or in certain setback zones |
| Site prep and grading | $200 – $800 | If we need to level ground, cut roots, or remove existing concrete footings |
A few things move these numbers in either direction. Flat, accessible yards with no demo work land on the lower end. Yards with retaining walls, sprinkler lines to dodge, or heavy slope push toward the $10,000 mark. Coastal neighborhoods like Alamitos Heights and Belmont Shore often need stainless steel hardware to resist salt air corrosion, which adds about $2 – $4 per linear foot over standard galvanized hardware. We’ll give you a written line-item price before any work starts, so the number on the invoice is the number you approved.
Aluminum Fence Cost by Linear Foot
If you want to estimate your own job, here’s the shorthand we use on site visits:
- 4′ tall residential aluminum fence: $22 – $35 per linear foot installed
- 5′ tall residential aluminum fence: $26 – $42 per linear foot installed
- 6′ tall aluminum fence (pool-safe with 2″ or under spacing): $32 – $50 per linear foot installed
- Single walk gate: $350 – $600
- Double drive gate: $700 – $1,500 depending on width and automation
These are installed prices for Long Beach soil conditions. If you live in a neighborhood with sandy loam like the areas around El Dorado Park, post setting goes faster and labor runs lower. If you’re inland toward Signal Hill or Lakewood Village where the soil is denser, expect post digging to take a bit longer.
What Affects Aluminum Fence Installation Pricing in Long Beach
Here are the factors that shift your quote the most, based on what we see regularly across Long Beach:
- Linear footage. This is the obvious one. A 100-foot side yard fence starts around $4,000, while a full 250-foot property perimeter can hit $10,000 plus gates. Most of the cost is in panels and posts, so footage scales nearly linearly.
- Panel height and style. A 4-foot decorative fence with pickets costs less than a 6-foot privacy-style aluminum fence with closer picket spacing. Pool-code heights (usually 60″) also narrow your panel options, which can raise material cost.
- Number of gates and gate width. Gates are where aluminum fence installs get expensive. A swinging double drive gate with steel frame reinforcement can run $1,200 – $1,500 alone. Every gate needs stronger posts, more concrete, and more labor to hang true.
- Old fence removal. If you’re replacing a chain-link fence set in concrete, that demo work adds $300 – $1,200 depending on length and how stubborn the footings are. Wood fences come out faster. We handle removal and disposal as part of the job, and it’s a line item on your written quote, never a surprise.
- Salt air and corrosion resistance. Belmont Shore, Naples, the Peninsula, and anything within a mile or two of the water needs marine-grade aluminum or at minimum stainless steel hardware. Standard powder-coated aluminum holds up fine inland, but salt air will eat through off-the-shelf hardware in five years. We account for this in the quote.
- Long Beach permit requirements. Fences over 42 inches tall typically need a city permit in Long Beach, and there are setback rules for corner lots and driveway sightlines. Permit fees run $80 – $250. We pull permits for you and include the cost in your written price.
Aluminum Fence vs. Other Fence Materials in Long Beach
Aluminum isn’t your only option, and the range can help you decide. Here’s how it compares to the alternatives in the Long Beach market:
- Aluminum fence: $4,000 – $10,000 for a typical yard. Rust-resistant, low maintenance, 25 – 40 year lifespan. Best for coastal salt air and pool areas.
- Vinyl fence: $3,500 – $9,000. Cheaper on average, but vinyl can warp in direct Long Beach sun and doesn’t hold up as well against ocean wind gusts.
- Wrought iron: $6,000 – $14,000. Similar look to aluminum but heavier, prone to rust, and needs repainting every few years. Aluminum gives you the look without the upkeep.
- Wood fence: $3,000 – $8,500. Lowest upfront cost but 10 – 15 years before rot and termite issues set in, especially with Long Beach’s coastal moisture.
If you’re between aluminum and vinyl, visit our Aluminum Fence Installation in Long Beach page for a deeper look at why aluminum wins near the coast. And if you’re weighing fence work against other projects, our home page lays out the full scope of what we do.
How to Save on Aluminum Fence Installation
You don’t have to gut the scope to bring the price down. These are the levers that actually move money on a Long Beach fence job:
- Get a full fence quote before you start pricing gates separately. Combining gates into the panel quote saves on labor setup costs. We build it all into one written price.
- Keep the layout simple. Long straight runs install faster than designs with multiple corners or zigzags. Every corner changes post spacing and adds cutting time.
- Standard height, standard color. Black powder-coated aluminum in 4′ or 5′ heights is the least expensive spec. Custom colors and odd heights carry upcharges from the manufacturer.
- Demo responsibly. If you can remove your own wood fence before our crew arrives, that trims a few hundred off the quote. Chain-link with concrete footings is the exception; let us handle that one.
- Bundle it with other work. If you’re already doing a driveway or patio project in the same season, combining visits can reduce mobilization costs. Ask us about it when you call.
- Get a free estimate. Call us at (562) 512-6480 and we’ll walk your yard, measure everything, and hand you a written price. No door knock, no pressure. The estimate is free and the number on it is the number you’ll pay if you move forward.
Can You Install An Aluminum Fence Yourself in Long Beach?
Some homeowners do. The panel systems sold at big-box stores are designed for DIY, and a 4-foot decorative fence on flat ground is a two-weekend project if you’re comfortable with a post-hole digger and a level.
But the places where DIY aluminum fences go wrong in Long Beach are the places you can’t fix after the concrete sets: post depth (you need 24 – 30 inches for a 6-foot fence), gate alignment on sloped driveways, and hitting utility lines. Long Beach has extensive gas and water line runs through older residential lots, especially in neighborhoods like Wrigley and North Long Beach that were built out mid-century. We call 811 before every dig, and we carry insurance. If you hit a line, it’s on us, not on you.
Also worth knowing: Long Beach code requires a permit for most fences over 42 inches. Doing it yourself without one can bite you when you sell the home or if a neighbor files a complaint. We handle permits as part of the job.
Aluminum Fence Long Beach: What to Expect on Install Day
Here’s how the job runs with Sawyer Remodel Long Beach and what to plan for:
- Written quote and permit pull. We measure, write the full price, and submit the permit paperwork. You get a copy of both before any work begins.
- Marking and 811. We call 811 to have underground utilities marked, then stake the fence line and confirm the layout with you. You’ll know where your posts land before we cut anything.
- Post holes and concrete. We set posts at 6-foot intervals (the industry standard for aluminum), in concrete, at the depth Long Beach code requires. Posts are the load-bearing piece of the whole fence, so we don’t rush this.
- Panel and rail installation. Panels slide into pre-punched post holes and lock in with brackets. This is the cleanest part of the install; most fences go up in a single day.
- Gate install and final leveling. Gates hang last. We check swing, latch tension, and clearance, then make adjustments. You’ll get before and after photos as part of The Relay Visibility Guarantee, and we walk the finished line with you before we call it done.
Total time for a standard residential aluminum fence: one to three days depending on footage and gate work.
How Long Does an Aluminum Fence Last in Long Beach?
A properly installed aluminum fence lasts 25 to 40 years in Long Beach, which is why it’s a strong long-term value even at a higher upfront price than wood or vinyl. The panels themselves are extruded aluminum with a factory powder coat, so they don’t rust, crack, or warp. The failure points, if any, tend to be hardware (hinges, latches, bracket screws) and posts that were set too shallow.
In coastal neighborhoods like Naples and the Peninsula, we recommend stainless steel or marine-grade hardware. Salt air will corrode standard zinc hardware in under a decade if left unprotected, even when the panels still look new. That’s a $50 – $150 hardware replacement on a fence that otherwise lasts decades. Not a dealbreaker, but worth speccing correctly at install.
FAQs – Aluminum Fence Installation Cost
How much does aluminum fence installation cost per linear foot in Long Beach?
Installed aluminum fence in Long Beach typically runs $22 to $50 per linear foot depending on panel height, style, and gate count. A standard 4-foot decorative aluminum fence installs around $25 – $35 per foot with labor included. For an exact price on your yard, call (562) 512-6480 and we’ll set up a free measurement.
Is aluminum fencing cheaper than vinyl in Long Beach?
No, aluminum fencing in Long Beach usually costs 10% to 20% more than vinyl. A comparable vinyl fence job runs $3,500 – $9,000, while aluminum lands at $4,000 – $10,000. The tradeoff is lifespan and coastal performance; aluminum outlasts vinyl by 15 – 25 years and doesn’t warp or blow out in ocean wind.
How much does it cost to install an aluminum fence gate?
A single aluminum walk gate in Long Beach adds $350 – $600 to the project. A double drive gate runs $700 – $1,500 depending on width and whether you want automatic openers. Gates cost more than panels because they need reinforced posts and heavier concrete settings to hold up under daily use.
Do you need a permit for an aluminum fence in Long Beach?
Yes, Long Beach requires a permit for most fences over 42 inches tall, and there are specific setback rules for corner lots and driveway sightlines. Permit fees run $80 – $250. We handle the permit paperwork as part of the estimate, so you’re not guessing at city requirements.
How long does aluminum fence installation take in Long Beach?
Most residential aluminum fence jobs in Long Beach take one to three days from first post hole to final gate adjustment. Permit approval time adds one to three weeks before install depending on the city’s current queue. We give you a timeline with your written quote so you know exactly when to expect us.
Is it cheaper to repair or replace an aluminum fence in Long Beach?
If the panels are structurally sound, repair is cheaper. Replacing bent sections, rusted hardware, or resetting posts typically runs $150 – $600. But if the fence is old enough that panels are corroding through or posts are failing repeatedly, replacement at $4,000 – $10,000 is the better long-term move. Call (562) 512-6480 and we’ll tell you honestly which one makes sense for your fence.
Get a Written Aluminum Fence Price in Long Beach
You shouldn’t have to guess what a fence costs. We’ll measure your yard, walk you through panel and gate options, and hand you a written line-item price before any work starts. The Relay Visibility Guarantee means you’ll know who’s coming, when they’ll arrive, and exactly what you’re paying, before the crew shows up.
Every aluminum fence install from Sawyer Remodel Long Beach is covered by our 365-Day Done Right Promise. If something isn’t done right in the first year, we make it right. In writing. No argument, no chasing.
Call (562) 512-6480 for a free aluminum fence estimate in Long Beach. Live person answers, 24/7.
Pricing reflects the Long Beach market as of 2026. Sawyer Remodel Long Beach offers free estimates – call (562) 512-6480.
Written by Luca Romano, Owner at Sawyer Remodel Long Beach, serving Long Beach since 2005.
What Our Customers Say
"Straight talk and simple communication. Every question got an answer by text within the hour."
- Cherie A."Floors and paint finished on time. Floors were sanded, stained, and the walls painted without any gaps in the schedule."
- Ron T."Booked a kitchen consult online and got a project timeline in the app. Crew texted each morning with the day's plan. Cabinets, counters, and backsplash look great."
- Erin K.
