Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Kitchen Remodeling: The Long Beach Owner’s Guide
If you’re looking for IKO kitchen remodeling in Long Beach, the honest range is $14,000 to $45,000 for a full kitchen overhaul, with most mid-size projects landing between $18,000 and $28,000. That includes the cabinets, countertops, backsplash, and fixtures, installed and warranted in writing. We’ll match your existing IKO layout or redesign it entirely, and the written price comes before any work starts.
Here’s the reality we see most often in Long Beach homes: a homeowner buys a place with IKO cabinetry already installed, lives with it for eight or ten years, and then a hinge gives out, a drawer face loosens, or a water stain from a slow sink leak starts creeping up the cabinet side. Sometimes it’s a single component that failed. Sometimes the whole kitchen is tired and the owner wants to know if they can keep the IKO layout and just replace what’s broken. The answer is usually yes, with a caveat about what’s worth saving.
Which IKO Models This Applies To
IKO cabinetry runs through several series lines that have shifted over the years, and the compatibility details matter more than most people expect. The older IKO lines, especially those installed in Long Beach homes built or renovated between roughly 2005 and 2015, used a mix of 3/4-inch plywood boxes and 5/8-inch drawer bottoms, with European-style cup hinges that had a specific 35mm bore pattern. Newer IKO lines moved to soft-close hardware as standard, which changes the hinge plate sizing and the drawer glide specs.
If you still have a label inside the drawer box or on the back of a cabinet door, that sticker will tell you the line, the finish code, and sometimes the production year. No label? We measure the hinge bore, the drawer glide length, and the door overlay to identify what you’re working with. For replacement parts, genuine IKO hardware or exact-match aftermarket equivalents are both options. We’ll tell you which one makes sense for your situation, and we won’t upsell OEM parts when a quality equivalent does the job for less.
Sawyer Remodel Long Beach is an independent remodeling contractor. We’re not affiliated with IKO, but we work with their cabinetry regularly and stock common IKO-compatible hardware and matching trim pieces. We also carry parts for KraftMaid, Cambria, and Silestone product lines when a mixed-material kitchen needs attention.
Styles & brands we work with
Signs Your IKO Kitchen Remodeling Is Failing
- Drawer glides that stick, grind, or drop on one side. This usually means the ball-bearing glide has worn out or the mounting clip has loosened. Left alone, the drawer box starts rubbing against the cabinet frame and chewing up the finish.
- Doors that won’t stay closed or bang shut. The hinge spring or the soft-close mechanism has failed. When one door goes, the ones next to it typically aren’t far behind, because they’ve all opened and closed the same number of times.
- Swollen or discolored cabinet bottoms under the sink. A slow leak from the P-trap or garbage disposal has been sitting against the particleboard or plywood. This is the most common IKO failure we see in Long Beach, especially in older beach-area homes where humidity runs high.
- Delaminating or peeling edge banding. The thin strip that covers the exposed cabinet edge starts lifting when the adhesive gives out or water gets behind it. Cosmetic at first, but it allows moisture into the core and the problem spreads.
- Soft-close hinges that slam with a loud crack. The damping fluid inside the hinge cylinder has leaked out or dried up. Replacement is straightforward, but the hinge spec has to match exactly or the door won’t sit flush.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a partial IKO kitchen refresh in Long Beach, here’s what we quote most often:
- Cabinet hardware replacement (hinges, glides, pulls): $400 to $1,800 depending on how many doors and drawers are involved and whether we’re matching existing finishes.
- Cabinet refacing or door replacement: $4,000 to $13,000, which includes new doors, drawer fronts, and matching veneer on the boxes.
- Full IKO kitchen remodel: $14,000 to $45,000, covering demolition, new cabinets, countertops, backsplash, sink, faucet, and finish work.
- Countertop replacement only (Cambria, Silestone, or Caesarstone): $2,000 to $6,500.
- Backsplash installation: $800 to $2,500.
Every quote is itemized in writing before work starts, so you see exactly what the parts cost and what the labor costs. If the number changes, it’s because you chose to change something, not because we found a surprise we forgot to mention. The work carries our 365-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Replacing a soft-close hinge or a drawer glide is doable for a homeowner with a drill, a tape measure, and patience, as long as you’ve correctly identified the exact spec. Where DIY usually goes sideways with IKO parts is the mismatch problem: you order a hinge online that looks right, the bore spacing is off by two millimeters, and now the door hangs crooked and rubs the frame. Or you strip the mounting screw holes by forcing a screw into a worn pilot hole.
Cabinet repair has no serious safety risk like a garage spring or electrical work, so we’re not going to talk you out of trying. But if you want it done once and matched correctly, we’re the crew that does IKO parts matching every week. Luca Romano and the team will get the right hardware the first time. Call (562) 512-6480 and we’ll walk you through what you’re dealing with.
FAQs
Expect 15 to 25 years from well-maintained IKO cabinetry, with hinges and drawer glides typically needing replacement around the 8 to 12 year mark. Long Beach’s salt air and humidity, especially within a mile of the coast, accelerates hardware corrosion and can shorten that timeline by a few years compared to inland homes.
Yes, and most of the time repair is the right call. Hinges, glides, edge banding, and drawer boxes can all be replaced or refinished without touching the cabinet boxes themselves. If the boxes are structurally sound, which they usually are with plywood construction, we repair rather than replace and you keep the budget down.
Most hardware-only replacements in Long Beach take one day, sometimes two if you have a large kitchen with 30 or more doors and drawers. Refacing runs three to five days. A full kitchen remodel runs three to eight weeks depending on countertop lead times and the scope of electrical and plumbing work.
We carry common soft-close hinges, drawer glides, mounting clips, and edge banding in the most-used sizes and finishes, so many repairs get done same-visit. If your model needs a less common spec, we order it and schedule the install within a few days. Call (562) 512-6480 with your cabinet label info and we’ll tell you what we have on hand before we even set the appointment.
Written by Luca Romano, Owner, Sawyer Remodel Long Beach at Sawyer Remodel Long Beach, serving Long Beach and nearby areas.
