Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Long Beach Owner’s Guide
ES Windows fence installation in Long Beach typically costs $3,500 to $9,000 installed, depending on how many fence sections and posts need to be set. We stock ES Windows-compatible fence panels, posts, and hardware, and most single-side fence installs are completed in two to three working days. The part owners usually call us about is a snapped post base or a panel that’s started pulling away from the house after a year or two of Long Beach coastal air doing its thing.
Here’s the truth about ES Windows fencing: the window brand makes great glass, but the fence framing that ships with some of their systems is a different animal. The aluminum extrusions are thinner than what you’d find on a dedicated fence manufacturer, and the connection hardware is often plated steel, not stainless. Within 18 to 36 months near the water in Naples or Belmont Shore, that plating wears through and you get the telltale orange streaking down the panel face. Luca Romano has pulled more ES Windows fence sections apart than he cares to count, and the failure point is almost never the window itself.
Which ES Windows Models This Applies To
We work on fence installation for the full ES Windows lineup commonly installed across Long Beach: the ES6500 series, the ES7500 multi-slide, and the ES9000 pivot door systems. The fence panels on these units are custom-sized at the factory, which sounds fine until you realize that means there’s no universal replacement panel. Each panel is cut to the opening’s exact width, down to the eighth of an inch. When you call us, we measure the opening, the panel thickness, and the post spacing before we order anything.
Here’s the compatibility gotcha most owners miss: the fence installed with an ES Windows unit is not manufactured by ES Windows. It’s fabricated by a third-party supplier, which changes based on when and where the home was built. A 2016 ES6500 in Bixby Knolls might have a different fence profile than a 2022 ES6500 overlooking Alamitos Bay. That’s why we ask for photos of the existing fence, any labels on the door frame, and ideally the original window order number before we quote. The good news: we use quality aftermarket aluminum framing that matches the ES Windows profile in most cases, and it’s usually 30 to 40 percent less than going through the original window dealer.
We’re an independent contractor and not affiliated with ES Windows. We work on their products because Long Beach has thousands of them installed, and someone has to actually answer the phone when one fails.
Styles & brands we work with
Signs Your ES Windows Fence Installation Is Failing
- Rust streaks below the panel screws. The plated steel fasteners on OEM ES Windows fences corrode fast in salt air, and the stain follows gravity. Once you see orange lines, the screw heads are already compromised and the panel is loose in the frame.
- Panel sag on the latch side. If the door still latches but the fence panel drops a quarter inch when you open it, the post anchors have started shifting. The post base plates on ES Windows fence installations are small for the panel weight, and Long Beach’s sandy soil doesn’t hold a shallow set for long.
- A scratchy or grinding feel when the panel slides. Dirt and salt grime build up in the bottom track. If you’ve cleaned the track and it still grinds, the rollers are done. ES Windows rollers are not field-serviceable on most models; the wheel assembly has to be swapped.
- Soft spots in the fence bottom rail. Water pools in the lower channel on poorly flashed installs, and the aluminum starts to pit from the inside out. You’ll feel a spongy give when you press on the rail, and you’ll see bubbling in the powder coat.
- Wind rattle when it’s blowing off the water. Long Beach gets real wind. If your fence chatters on blustery days, the panel-to-post clearances have opened up, usually because the original install used shims that have since compressed or rotted.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation for an ES Windows system in Long Beach runs $3,500 to $9,000 installed. A single panel swap on the smaller end, say a 6-foot fixed panel, lands around $3,500. A full perimeter fence replacement with three or four posts, hardware, and reinstalling the existing windows behind it pushes toward $9,000.
What drives the range:
- Panel count and linear footage
- Whether posts can be reused or need to be reset (most need resetting)
- Stainless steel versus plated hardware upgrade
- Powder coat color matching to your existing window frames
- Site access, which in older Long Beach neighborhoods like Rose Park or Bluff Heights can mean tight gates and zero room for equipment
Every fence installation from Sawyer Remodel Long Beach includes the written price before we start, the labor and hardware warranty for one full year, and the 365-Day Done Right Promise: if something isn’t right, we make it right. Call (562) 512-6480 and we’ll send someone out to measure, photograph, and get you a line-item number. Not a ballpark that changes next week.
DIY or Call Us?
You can safely check a few things yourself: clean the track with a dry brush (no WD-40, it just attracts more grime), tighten any visible screws that haven’t rusted through, and note where the panel is binding. That helps us quote faster. What you shouldn’t do is attempt to lift a glass-filled ES Windows panel out of its track with two people and a prayer. Those panels are heavy, and when powder-coated aluminum lets go under load, it doesn’t give you a warning. We’ve seen a fence panel take out a paver and a sprinkler head when a homeowner’s suction cup slipped.
The other reason DIY goes wrong here: alignment. An ES Windows fence needs to sit parallel within a sixteenth of an inch across the run, or the window binds and you’re now paying for window repair plus the fence. We do fence installs with a laser level and a torque wrench, not guesswork. If you’d rather not wrestle a 200-pound panel on a Saturday, call (562) 512-6480 and get it done once.
FAQs
A properly installed ES Windows fence with stainless hardware and good flashing lasts 15 to 20 years near the coast. Factory installs with plated steel hardware typically need a hardware swap within 3 to 5 years in salt-exposed areas like Belmont Shore or the Peninsula. Call (562) 512-6480 for an inspection and a written quote.
Yes, if the panel itself is intact and the posts are still sound, we can replace the hardware, reset the posts, and re-align the panel. If the aluminum has pitted through or the panel is cracked, replacement is the honest call. We’ll tell you which one applies before any money changes hands.
A single-panel hardware and post reset usually takes one working day. A full fence replacement with multiple posts and powder coat matching typically takes two to three days in Long Beach. We’ll give you a schedule with the written estimate, not a vague “sometime next week.”
We stock common aftermarket aluminum fence extrusions, stainless hardware kits, and replacement rollers on our trucks for quick turnarounds. If your panel profile requires a custom match, we order it and have it staged within five to seven business days. Call (562) 512-6480 with your window model and we’ll tell you what’s on hand for your specific fence.
Written by Luca Romano, Owner, Sawyer Remodel Long Beach at Sawyer Remodel Long Beach, serving Long Beach and nearby areas.
