Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Long Beach Owner’s Guide
If you’ve got a driveway or paver project tied to ES Windows work in Long Beach, we handle the full scope: paver driveway installation runs $7,000 – $18,000, concrete driveways run $4,500 – $12,000, and driveway replacement lands between $5,000 – $14,000. Most owners call us because they’re mid-renovation, replacing old windows with ES Windows units, and realize the driveway is undermining the whole exterior, or because pavers have shifted and water is now pooling against the foundation. We match the right paver or concrete spec to the job, write the price before any work starts, and get it done without turning your front yard into a six-week construction zone.
Key Takeaways:
- Paver driveways in Long Beach run $7,000 – $18,000 installed; concrete runs $4,500 – $12,000.
- We write the full price before work starts under The Relay Visibility Guarantee.
- ES Windows owners often need driveway work tied to drainage, grading, or exterior updating.
- The 365-Day Done Right Promise covers the work for a full year, in writing.
Which ES Windows Models This Applies To
ES Windows doesn’t make driveway pavers. That’s the first thing to understand, and it matters because some contractors will lean on the brand name to blur that line. What connects ES Windows to your driveway is the exterior envelope: if you’re installing or have installed ES Windows product lines like their thermally broken aluminum frames or their sliding door systems in a Long Beach home, the surrounding hardscape has to work with the new sightlines, drainage plane, and elevation. We see this constantly on bungalow remodels in Belmont Shore and Alamitos Heights, where the new window bottom sits lower than the original, and suddenly the driveway pitch is wrong.
The compatibility question is really a grading and drainage question. ES Windows units, particularly the larger fixed and sliding configurations, are engineered for tight sill clearances. If your paver driveway slopes toward the house, you will get water against the window line, and no window on the market handles repeated water contact at the sill without problems. We check the driveway pitch, the paver base depth, and the finished height relative to the window sill before we price anything. Sawyer Remodel Long Beach is an independent contractor, not affiliated with ES Windows, which means we’re free to tell you honestly when the driveway is the problem and the windows are fine.
Styles & brands we work with
Signs Your ES Windows Driveway & Pavers Is Failing
Driveway and paver failures show up slowly, then all at once. Here’s what we see across Long Beach, from Naples to Bixby Knolls:
- Water pooling against the house or window sill. The driveway has lost its pitch, usually because the base under the pavers has settled. In Long Beach’s clay-heavy soil, this is the number one failure we see after a rainy season.
- Pavers shifting or rocking underfoot. When individual pavers move, the sand joint has failed and the base is eroding. Each shift lets more water into the sub-base, which accelerates the whole thing.
- Edge collapse along the driveway border. Without a proper edge restraint, the outer pavers walk outward under vehicle weight. Once the edge is gone, the rest of the field follows within a year or two.
- Cracks radiating from the garage apron. The apron takes the most load and the most water. If the original pour didn’t include appropriate rebar or the sub-base was thin, the apron cracks first and the cracks creep toward the house.
- Visible gaps at the expansion joint or window sill line. This is the one that ties directly to ES Windows work. If you see daylight or caulk separation between the driveway and the sill area, water has a direct path to the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest money, Long Beach. A full paver driveway installation in this city runs $7,000 to $18,000 depending on square footage, paver type, and what we find when we open up the old base. Concrete driveway installation lands at $4,500 to $12,000. If you’re doing a full driveway replacement, budget $5,000 to $14,000. Driveway sealing, which we recommend every 2 – 3 years in Long Beach’s sun and salt air, runs $250 to $700.
Every quote includes removal of the existing surface, base prep and compaction, material, installation, edge restraint, and cleanup. What drives the range is mostly three things: the paver product you choose (basic concrete pavers versus higher-end travertine or porcelain), the access to the site (a tight Naples alley truck situation costs more than a wide Belmont Heights driveway), and the condition of the existing base. We don’t quote a low number and “discover” problems later. The written price you approve is the price you pay. If we open it up and find something genuinely unexpected, we stop, we photograph it, we explain it, and we get your approval in writing before spending another dollar. That’s The Relay Standard.
DIY or Call Us?
Here’s the split. You can safely inspect a driveway: walk it after rain, look for pooling, rock the pavers with your foot, check the edge restraint, and look at the gap at the window sill. You cannot safely rebuild a paver base that has failed. The base is the whole job, and if it’s not compacted in lifts with the right aggregate, your new pavers will fail faster than the old ones. We’ve pulled up DIY paver jobs in Long Beach where the owner used sand as a base because it looked the same as the bag of paver base at the hardware store. It’s not. A failed base under vehicle load is not a cosmetic problem; it’s a structural one that puts water against your foundation and your window sills.
If you’re seeing any of the signs above, call (562) 512-6480. We’ll send a background-checked, uniformed technician who will measure the pitch, check the base, and give you a written price. You don’t pay a cent for the estimate.
FAQs
A correctly installed paver driveway in Long Beach lasts 25 – 30 years with routine sealing and joint sand maintenance every few years. Direct sun and salt air from the coast fade color and dry out sealant faster than inland, so expect to seal more often if you’re in Naples or Belmont Shore. Call (562) 512-6480 for an assessment of your specific driveway’s age and condition.
Yes, sometimes. Edge collapse, isolated paver shifting, and minor settlement in a small area can often be repaired by lifting the affected section, rebuilding the base, and reinstalling. But if the base under the whole field has failed, patching buys you a year at best. We’ll tell you which situation you have, with photos, before we ask you to spend anything.
A typical Long Beach paver driveway takes 3 – 7 working days from demo to final compaction, depending on size and access. Rain days extend that, of course. We give you a live arrival time, photo updates before and after, and the schedule is in the written quote.
We stock the fast-moving base materials, edge restraints, and joint sand on our trucks and at our Long Beach yard. For the paver product itself, we order per project from our supplier partners, including options that pair cleanly with ES Windows sightlines and other exterior finishes from brands we trust, like KraftMaid, Cambria, and Silestone on the interior side of a full exterior renovation. We’ll bring samples to your house so you see the actual color and texture in Long Beach light before committing.
Written by Luca Romano, Owner, Sawyer Remodel Long Beach at Sawyer Remodel Long Beach, serving Long Beach and nearby areas.
Ready for a written price? Call (562) 512-6480 and we’ll have someone on site to look at your driveway, no charge and no pressure. The work tells you everything. The rest is just talking.
