







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Home Additions & ADU: The Long Beach Owner’s Guide
ECO Window Systems home additions and ADU projects in Long Beach typically run $45,000 to $130,000 installed, depending on square footage, foundation work, and how much of the existing window and door package you’re tying into. We stock and install ECO Window Systems-compatible windows, sliders, and door systems for these projects, and we match existing frames and glass packages so the addition doesn’t look like an afterthought. Most owners discover they need this work when a window or slider in their existing ECO install fails, or when they’re planning an ADU and want the new unit to match the main house exactly.
Here’s the reality we see on job sites across Long Beach: ECO Window Systems makes a solid product, but the parts that fail first are almost never the glass. It’s the rollers on sliders, the weatherstripping that goes brittle after five to seven years of salt air, and the locking mechanisms that bind up once the frame shifts half a degree. When you’re adding onto a home or building an ADU, you’ve got a decision to make: patch the old units, or bring everything into alignment so the whole property performs like it should.
Key Takeaways:
- Installed home addition pricing in Long Beach runs $45,000 – $130,000; ADU construction runs $90,000 – $220,000.
- We match ECO Window Systems frames, glass packages, and hardware so new work blends with existing installs.
- Written price before any work starts, every time. No surprises on the invoice.
Which ECO Window Systems Models This Applies To

ECO Window Systems has produced several series over the years, and the compatibility gotcha that trips up most Long Beach homeowners is this: the frame extrusion profiles changed around 2018. If your existing windows or sliders were installed before that, the new trim kits and replacement rollers from the current catalog don’t always drop in without modification. We keep records of both old and new profile dimensions on our trucks, so we can tell you within the first five minutes of looking at the unit whether it’s a clean swap or a retrofit.
The models we work with most in Long Beach are the ECO 700 series sliders, the 500 series fixed and casement windows, and the multi-slide door systems that show up in a lot of the ranch houses and mid-century homes from Bixby Knolls down to the Shore. Look for a small sticker or etching in the corner of the glass, usually on the spacer bar between the panes. It’ll have a four-digit series code. If it’s faded or gone, we can identify the profile by pulling the sash and checking the extrusion stamp.
OEM versus aftermarket: for glass, we recommend OEM or a direct equivalent because the Low-E coating and spacer bar have to match the existing units if you’re replacing one sash in a multi-sash run. For hardware like rollers, handles, and locks, quality aftermarket parts often outlast the originals, especially in coastal locations where salt air eats the factory zinc hardware. We’ll give you the straight answer on which is worth paying for and which is a waste of money.
Styles & brands we work with







Signs Your ECO Window Systems Home Additions & ADU Is Failing
- Slider won’t glide anymore. The rollers are flat-spotted or the bearings are seized. In Long Beach’s salt air, factory rollers typically fail between year five and year eight. You can feel it: the door goes from one-finger operation to two-hands-and-a-shoulder.
- Condensation between the panes. The insulated glass seal has failed. Once the desiccant inside the spacer bar is saturated, you get fog you can’t wipe off. That’s not a cleaning problem; it’s a replacement glass issue.
- Drafts around the frame. Weatherstripping has compressed or gone brittle. Coastal air accelerates this, and once the seal goes, you’re paying to air-condition Long Beach.
- Lock won’t engage or sticks halfway. The frame has shifted, usually from foundation settling or the weight of a slider that was never properly shimmed. Forcing the lock bends the keeper and makes it worse.
- Crank operator on casement windows slips or grinds. The gear teeth in the operator are stripped. Common on windows that get opened daily in the beach breeze, and a cheap replacement part if you catch it before the arm bends.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Long Beach, replacement window and door work tied to a home addition or ADU runs from $45,000 up to $130,000 when it’s part of a full addition. A standalone ECO Window Systems slider replacement with matched glass typically falls between $4,500 and $8,500 installed, depending on size and whether we’re doing a straight sash swap or pulling the whole frame. ADU construction with ECO Window Systems products throughout runs $90,000 to $220,000 depending on finish level and foundation work.
| Project Type | Long Beach Price Range |
|---|---|
| Home Addition (with ECO Window Systems windows/doors) | $45,000 – $130,000 |
| ADU Construction (full build, ECO products throughout) | $90,000 – $220,000 |
| Garage Conversion with ECO Window Systems | $30,000 – $80,000 |
| ECO Window Systems Slider Replacement (standalone) | $4,500 – $8,500 |
| ECO Window Systems Window Replacement (per unit) | $4,500 – $15,000 |
Every quote includes the parts, labor, disposal of the old units, and a written line-item breakdown so you see exactly where the money goes. We don’t do change orders that balloon at the end. The price we hand you before work starts is the price you pay. And every job carries the 365-Day Done Right Promise: if something’s not right, we make it right, in writing, no runaround.
DIY or Call Us?
Here’s the honest split. You can safely check a few things yourself: clean the tracks, inspect the weatherstripping for cracks, and note where the fog or binding is happening so you can describe it accurately on the phone. What you shouldn’t do is try to pull a sash out of an ECO Window Systems slider or casement yourself. Those sashes are heavy, the spring-loaded balance systems in casement and single-hung units are under tension, and a mishandled sash can take a finger off or drop a pane of glass on a patio. That’s not us being dramatic. That’s us having seen it.
If the unit is fogged, binding, or the lock won’t engage, call us at (562) 512-6480. We’ll schedule a free estimate, confirm the series and profile on site, and hand you a written price before any work begins. No four-hour windows. You’ll know who’s coming, when they’ll arrive, and what it costs.
FAQs

In coastal Long Beach conditions, you can expect 15 to 20 years from the frames and glass, but hardware components like rollers, weatherstripping, and locks typically need replacement every 5 to 8 years due to salt air exposure. We recommend a hardware refresh at the first sign of stiffness rather than waiting for full failure. Call (562) 512-6480 and we’ll tell you over the phone whether it’s a quick hardware swap or time for full replacement.
Yes, in most cases a failed unit can be repaired. Fogged glass means replacing the insulated glass unit, not the whole window. A seized slider usually just needs new rollers. A binding lock is often an adjustment or a new keeper. Full replacement only makes sense when the frame is warped, rotted, or the profile is discontinued and no matching glass is available. We’ll tell you the cheapest option that actually fixes the problem, not the one that pads the invoice.
Most single-unit replacements, including glass swaps and hardware rebuilds, are done in one visit. Full-frame replacements or multi-unit projects tied to a home addition or ADU build take longer, but we give you a schedule in writing before work starts, with photo updates throughout. Call (562) 512-6480 for an exact timeline on your specific project.
We stock the common failure parts on our trucks: rollers, weatherstripping, lock sets, and crank operators for the ECO 500 and 700 series. Specialty glass and full sash replacements are ordered per job, usually with a 3 to 5 day lead in Long Beach. If we have the part on hand, we can often handle it the same day we look at it.
Written by Luca Romano, Owner, Sawyer Remodel Long Beach at Sawyer Remodel Long Beach, serving Long Beach and nearby areas.


