Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Long Beach Owner’s Guide
We stock, match, and install Mr-Glass kitchen remodeling components across Long Beach, with full-kitchen projects typically running $14,000 – $45,000 installed. Most owners reach out after a cabinet door stops sitting flush, a drawer slide binds, or a glass insert develops a crack that spreads through the frame. The fix usually comes down to replacing the failed part rather than the whole cabinet run, and we keep the common Mr-Glass hardware and glass-mount components on our trucks.
Which Mr-Glass Models This Applies To
Mr-Glass kitchens come through Long Beach homes in a few distinct cabinet and glass-front configurations, and the part you need depends on which one you have. The frameless glass-front upper cabinets use a different hinge cup depth than the framed models, and mixing them up leaves a door that never closes square. We identify what you have by measuring the hinge boring diameter (35mm is standard on the frameless line) and checking the edge profile on the glass insert.
When a part is no longer produced, we match it to a quality aftermarket equivalent that fits the original opening without shimming. On the OEM side, Mr-Glass glass inserts are tempered to a specific thickness tolerance, and aftermarket glass that runs thinner tends to rattle inside the frame when the door closes. We’d rather order the right cut than send a crew out twice. For cabinet boxes, we work with KraftMaid and Wellborn cabinetry as replacement options when a full rebuild makes more sense than a patch.
One compatibility gotcha we see often: the soft-close dampers on Mr-Glass doors wear out faster in Long Beach’s salt air, especially within a mile of the water near Belmont Shore or Naples. The damper itself is replaceable without swapping the hinge, which saves a lot of money, but the part number changes between the 2018-and-earlier and 2019-and-later hinge bodies.
Styles & brands we work with
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Cabinet door won’t stay closed or bounces back open. The soft-close damper has failed or the hinge spring lost tension. On frameless Mr-Glass uppers, this usually starts on the door you open most, and it only gets worse.
- Glass insert is cracked, chipped at the edge, or loose in the frame. Tempered glass can hold a hairline crack for months before failing. If you can move the glass by pressing on it, the gasket has compressed and needs replacement along with the insert.
- Drawer slide grinds, sticks, or drops to one side. The ball-bearing slides Mr-Glass uses in the lower cabinets bind when the bearings wear flat. Running a drawer on a damaged slide chews up the cabinet box runners, turning a $40 part into a $400 repair.
- Hinge screws strip out of the cabinet face. Long Beach’s summer humidity followed by dry winter air expands and contracts the cabinet material. Once the screw holes oval out, the door sags and the hinge plate needs a repair insert or the door needs remounting.
- Glass-front cabinet gets condensation inside on humid mornings. That points to a failed seal around the glass. Moisture inside a sealed unit means the desiccant has saturated, and it won’t recover. The insert needs to be cut and reseated.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Mr-Glass kitchen remodel in Long Beach runs $14,000 – $45,000. If you’re replacing a section or rebuilding one wall of cabinets, the number lands closer to $4,000 – $13,000 for cabinet installation, plus countertop work at $2,000 – $6,500 when the old tops come off. Single-part fixes, like a hinge set, damper replacement, or one glass insert, typically run a few hundred dollars installed and we do them the same visit.
Every quote is a written line-item price before we start work. That means the part, the labor, and the disposal, on paper, no open-ended allowances. We pull permits when the job requires it, and every project falls under the 365-Day Done Right Promise: if it’s not right, we come back and make it right. We also back the work with a free second visit if a repair fails.
You’ll know exactly who is arriving. Our technicians are background-checked and uniformed, and you get a live arrival time under The Relay Standard, not a four-hour window. Before-and-after photos go to your phone, and the invoice is digital, payable from a link.
DIY or Call Us?
You can safely check a few things yourself: look for a loose hinge screw, run your finger along the glass edge for movement, listen for grinding when the drawer opens. But if the part is a spring-loaded soft-close hinge or a tensioned drawer slide, don’t try to pop it apart yourself. Those springs carry enough force to pinch hard, and a hinge under load can fire small parts across the room when it releases wrong.
Glass inserts are another one to leave alone. Mr-Glass panels are tempered, which means they shatter into small chunks instead of shards, but removing a cracked or bound panel without the right suction tool sends glass everywhere. If the glass is cracked, stop using that door and call us at (562) 512-6480. We’ll bring the right removal gear, match the insert, and have the cabinet closed back up the same day.
FAQs
With the right materials and install, expect 15 to 25 years from the cabinet boxes, but the moving hardware, hinges, slides, and soft-close dampers, typically needs replacement every 7 to 10 years in Long Beach’s salt air. Homes west of the 710 and close to the water see that shortened more.
Sometimes, yes. A loose hinge plate can be repaired with a threaded insert, and a sticky slide can often be cleaned and re-lubricated. If the bearing races are worn or the soft-close cylinder has leaked its fluid, replacement is the honest fix. Call (562) 512-6480 and we’ll tell you which one you’re dealing with.
A full Long Beach kitchen remodel with Mr-Glass components typically runs 4 to 8 weeks depending on cabinet lead times and whether we’re moving plumbing or electrical. A single-cabinet repair or glass insert swap is same-day in most cases.
We carry the most common hinge sets, soft-close dampers, glass-mount gaskets, and drawer slides for Mr-Glass cabinet lines on our service vehicles. Uncommon or discontinued parts we order cut to spec, and we’ll give you the lead time before you approve anything.
If your Mr-Glass kitchen is showing signs of failing hardware or cracked glass in Long Beach, call (562) 512-6480 for a free estimate. We’ll tell you what’s wrong, what it costs in writing, and when we can fix it.
Written by Luca Romano, Owner, Sawyer Remodel Long Beach at Sawyer Remodel Long Beach, serving Long Beach and nearby areas.
