Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Long Beach Owner’s Guide
We stock and install Cambridge Pavers-compatible driveway pavers across Long Beach, with typical installed repair and replacement work running $7,000 – $18,000 for a full driveway and $3,500 – $11,000 for a patio. Most smaller paver swaps, edge restorations, and spot replacements land in the $250 – $2,500 range depending on square footage and base condition. What usually brings Long Beach homeowners to this page is a sunken section near the curb, a cracked paver that’s shifted out of alignment, or an edge row that’s starting to wander into the lawn. You’ve already got Cambridge Pavers on the ground. The question is whether the problem is just the surface or something underneath.
Key Takeaways:
- Cambridge Pavers are modular, so individual units can almost always be replaced without redoing the whole surface.
- Long Beach’s clay-heavy soil expands and contracts with moisture, which causes most settling we see within the first 5 – 7 years.
- We carry Cambridge-compatible replacement units and can source exact matches by paver name and color code.
- Written pricing before work starts, on every paver job.
Which Cambridge Pavers Models This Applies To
Cambridge Pavingstones produces three main paver collections you’ll see across Long Beach driveways and patios: the Sherwood Collection (tumbled, old-world texture), the Ledgestone Collection (larger format, cleaner lines), and the RoundTable Collection (circular patio kits). Each line uses different mold dimensions, so a Sherwood paver won’t seat properly next to a Ledgestone paver even if the colors match. That’s the compatibility gotcha most homeowners hit when they try to patch a section themselves.
The fastest way to identify what you have: flip over a loose paver. Cambridge stamps the collection name and manufacturing code on the underside. If the stamp is worn off, measure the paver. Sherwood units run about 6″ x 9″, Ledgestone runs 4″ x 8″ up to 12″ x 12″, and RoundTable pieces are wedge-shaped with specific arc radii. When we source replacements, we match color lot codes too. Cambridge runs color blends in batches, and a “Sahara Chestnut” from 2019 won’t perfectly match the same color name poured in 2024. We note this up front because the mismatch is subtle at first and obvious after six months of sun.
Sawyer Remodel Long Beach is an independent contractor, not affiliated with Cambridge Pavers. We work with their products daily because they hold up well in Southern California, but we also stock and recommend quality aftermarket equivalents when a paver line’s been discontinued.
Styles & brands we work with
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
- Low spots that pool water after rain. Long Beach’s clay soil shifts with moisture, and a low paver section almost always means the base underneath has settled or washed out. Surface patching won’t fix it for long.
- Edge pavers tilting toward the lawn or street. Without proper edge restraint, the outer row slowly spreads. You’ll see a widening gap between the last row and the driveway border.
- Hairline cracks across multiple pavers in one area. That’s not a paver problem, that’s a base or drainage problem. The pavers are the symptom, not the cause.
- Weeds or ants erupting from the joints. Polymeric sand has broken down or was never installed properly. Water’s getting underneath and pests are building colonies in the void.
- Color is chalky or faded on half the driveway, not all of it. Cambridge Pavers include color throughout the unit, so this usually means incompatible replacement pavers or a sealer that failed on one section.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Long Beach, a full Cambridge Pavers driveway installation runs $7,000 – $18,000 depending on square footage, paver line, and what we find when we excavate the old base. A paver patio runs $3,500 – $11,000. Spot repairs, paver replacement, and edge restoration run $250 – $2,500. The range exists because some bases are intact and some are crumbled clay that needs full re-compaction and new aggregate.
Every quote includes the pavers, bedding sand, base material, edge restraint, polymeric joint sand, haul-away of old material, and labor. No line item appears later that wasn’t on the written price you approved. We pull permits when the city requires them, typically for new driveways or expansions, not for like-for-like repairs. The work carries our 365-Day Done Right Promise: if the repair fails within a year, we come back and fix it. Covered, no argument.
Accelerated Cost Drivers
- Full base rebuild vs. paver-only replacement
- Access: a narrow Long Beach alley or zero-lot-line side yard adds labor time
- Color lot matching on older installations
- Permit requirements for added square footage
DIY or Call Us?
You can safely inspect a few things without touching a paver. Flip over a loose unit to read the Cambridge stamp. Push on a sunken section with your foot and feel for movement. Check whether water pools after rain and where it drains. Those observations help us quote faster.
What goes wrong with DIY paver repair is always underneath. If the base has shifted, swapping the surface paver is like changing a tire on a car with a bent axle. You’ll be back in the same spot in three months. Pulling and resetting pavers on a sloped Long Beach driveway without compacting the base properly leads to a wavy surface that looks fine for a season, then settles into a mess. The work tells you everything. The rest is just talking. If you’d rather not learn paver base mechanics the hard way, call (562) 512-6480 and we’ll bring a straight answer and a written price.
FAQs
Cambridge pavers themselves carry a lifetime warranty from the manufacturer and typically last 25 – 50 years in Southern California. What fails first is the base and joint sand, which we see needing attention every 7 – 15 years depending on drainage and traffic. Call (562) 512-6480 if your pavers are shifting and we’ll tell you whether it’s a surface fix or a base rebuild.
A cracked paver gets replaced, not repaired. The good news is that individual Cambridge units lift out and swap in cleanly when the base is sound, and we match color lots so the new paver blends. If multiple pavers are cracked in one zone, the base is the actual problem. Call (562) 512-6480 for a free estimate and we’ll diagnose it properly.
Most spot repairs and paver replacements take one day. A full driveway replacement in Long Beach typically runs 3 – 5 working days including base prep, paver installation, and joint sanding. You’ll have a written timeline before we start, and photo updates as the work progresses. Call (562) 512-6480 to schedule a look at your driveway.
We stock common Cambridge-compatible replacement units on our trucks for standard Sherwood and Ledgestone colors, and we order exact color-lot matches for larger replacement jobs. If you need a discontinued paver, we source quality aftermarket equivalents that match the footprint and surface wear. Call (562) 512-6480 with your paver’s stamp information if you can find it, and we’ll confirm availability before you spend another weekend on it.
At Sawyer Remodel Long Beach, we also work with KraftMaid, Cambria, and Silestone on the interior side, so if your paver project turns into a bigger conversation about your Long Beach home, we can handle that end too.
Written by Luca Romano, Owner, Sawyer Remodel Long Beach at Sawyer Remodel Long Beach, serving Long Beach and nearby areas.
