Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Long Beach Owner’s Guide
We stock and install Tremron-compatible driveway pavers and patio pavers across Long Beach, with most paver driveway jobs landing between $7,000 and $18,000 installed. That price includes tear-out of the old surface, base prep, paver installation, and edge restraint. Homeowners usually call us after noticing a sunken section near the curb, a paver that’s cracked straight through from vehicle weight, or sand washing out between joints after a heavy rain.
The truth about pavers in Long Beach is that the base fails before the paver does. Tremron makes a solid concrete paver, but if the base underneath was skimped on, the whole surface shifts. We see it in Naples and Belmont Shore constantly: pavers still in good shape sitting on a base that settled two inches. You don’t need new pavers in that case. You need the base re-done and the existing pavers re-set, which costs far less than a full replacement.
Which Tremron Models This Applies To
Tremron runs several lines that show up regularly on Long Beach driveways. The Tremron Stonehenge series, the Mega Olde Towne pavers, and the Holland Stone line are the three we pull up most often on tear-outs and repairs. Stonehenge runs about 6″ x 9″ with a tumbled edge. Mega Olde Towne is bigger, closer to 8″ x 12″, and gives you that irregular, old-world look. Holland Stone is the workhorse rectangle most older Long Beach driveways were built with.
The compatibility gotcha most homeowners miss: Tremron color batches vary by manufacturing run. If you need to replace 20 pavers from a driveway poured six years ago, a new pallet of the same color name might not match. We deal with this by pulling from multiple supplier lots in the Long Beach area and dry-laying a sample before we commit. It’s a small step that prevents the patchwork look. We’re an independent service provider, not affiliated with Tremron directly, so we carry both OEM Tremron pavers and quality equivalents that match the dimensions and color profile.
Identifying your exact paver is straightforward. Flip one over. Most Tremron products have the name stamped on the bottom or the side. If the stamp is worn, measure the dimensions and check the edge profile, tumbled versus sharp. We can match from a photo, but a physical sample gets it right the first time.
Styles & brands we work with
Signs Your Tremron Driveway & Pavers Is Failing
- Sunken depressions near the driveway apron. This is almost always base failure, not paver failure. In Long Beach’s clay-heavy soil, water gets under the base layer, the clay shifts, and the pavers sink with it. The fix is removing the section, re-compacting, and re-laying.
- Sand washing out between joints after rain. Joint sand is what locks pavers together. When it washes out, the pavers start shifting and chipping at the edges. We use polymeric sand on Long Beach jobs because it hardens and resists erosion better than plain sand.
- Crooked or wavy edge lines along borders. This means the edge restraint has failed or was never installed properly. Without good edge restraint, the whole field of pavers migrates outward over time.
- Cracked pavers in the wheel path. Vehicle weight concentrated in one line cracks pavers when the base has voids underneath. It’s rarely the paver’s fault. A properly compacted base spreads the load.
- Weeds or ants pushing up between pavers. This is a sign the joint sand is gone and organic material has taken its place. Left alone, the roots push pavers apart and the surface gets uneven.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For full paver driveway installation in Long Beach, plan on $7,000 to $18,000 depending on square footage, access, and the condition of the existing base. A paver patio runs $3,500 to $11,000. If the pavers themselves are still good and you only need a partial re-set or base repair, you’re usually looking at a fraction of that, though the exact number depends on how much square footage failed.
What drives the range: the depth of excavation required, whether we can run a plate compactor without disturbing neighbors or walls, and how much base material has to be hauled out and replaced. We write the price before any work starts, with the paver cost, base material, labor, and haul-away broken out line by line. That written price is the price. If we find something unexpected underneath, you’ll hear about it before we spend a dollar more, not after.
Every paver job comes with our 365-Day Done Right Promise: if the pavers shift, sink, or the sand washes out within a year, we come back and fix it. No argument, no invoice. It’s in writing on every project.
DIY or Call Us?
You can safely check a few things yourself. Look for the Tremron stamp on the bottom of a loose paver. Check whether the sand between joints is full or washing out. Check if the edges are straight or wandering. That tells you whether you’re dealing with a paver problem or a base problem.
The DIY risk on pavers isn’t danger, it’s cost. A homeowner pulling up a sunken section and re-setting pavers without re-compacting the base will have the same problem again in six months. And matching Tremron colors across manufacturing runs is a skill that most people don’t find out they needed until the new pavers are in and the patch looks wrong. If you want it done once and done right, call (562) 512-6480. We’ll tell you straight whether it’s a repair or a replacement, and we’ll put the price in writing before anything gets touched.
FAQs
Tremron pavers themselves typically last 25 to 40 years in Long Beach’s coastal climate, but the base underneath usually needs work at the 15 to 20 year mark. The pavers survive; the base doesn’t. Call (562) 512-6480 if you’re seeing sunken spots or joint sand washing out, and we can tell you which one you’re dealing with.
Yes, in most cases. If the pavers themselves are intact, we pull the affected section, re-compact the base, and re-lay the same pavers. It costs significantly less than full replacement. If the pavers are cracked through, we match as close as possible to your Tremron color and batch. Call (562) 512-6480 for a free estimate on which path applies to your driveway.
A partial base repair or small section re-set usually takes one to two days. A full driveway tear-out and re-install runs three to five days depending on square footage and access. We’ll give you a written timeline before work starts, and you’ll get photo updates as the job progresses.
We stock common Tremron Holland Stone sizes and can source Stonehenge and Mega Olde Towne within a day or two from local Long Beach suppliers. You don’t need to order anything yourself. We handle sourcing, delivery, and the color matching, and we don’t mark up the material beyond what the supplier charges plus hauling.
Written by Luca Romano, Owner, Sawyer Remodel Long Beach at Sawyer Remodel Long Beach, serving Long Beach and nearby areas.
